IDEC FS1A Controller - Manual (Page 27)

3-2
● Prevent SafetyOne from falling while moving or transporting the SafetyOne, otherwise damage
or malfunction of the SafetyOne may result.
● Prevent metal fragments and pieces of wire from dropping inside the SafetyOne housing.
● Install SafetyOne, so that there is adequate spacing from walls, heat generating bodies, and
peripherals, taking into consideration space requirements for maintenance and ventilation.
● Install SafetyOne on 35mm DIN rails with BNL6 mounting clips (sold separately) on both sides of
SafetyOne.
● Perform wiring to the connectors with proper cables or ferrules.
● Ground FE terminal to assure electromagnetic compatibility (EMC)
● Use common 0V DC, if different power supplies are used for SafetyOne and other devices (ex.
safety light curtains).
● Install wiring for the inputs and outputs so that it is separated from power lines.
.