FEC DSP1500 (SAN3) - Manual (Page 37)

enFORCE SAN Unit Operation Manual
PAGE 6 - 37
Chapter 6: System Operation
¾ Data Number 13 - Target Load
ƒ In Load Control Methods, this is the target load value.
(Example: If Target Load is 10KN, press will attempt to operate until 10KN is achieved.)
A setting is possible from 0 to 105% of full-scale value.
¾ Data Number 14 – Press Speed Start Load
ƒ The load value at which the speed of the press will change to [53: Press Speed].
A setting is possible from 0 to 105% of full-scale value.
If Press Speed Start Load is detected, even if it has not reached the Approach
Distance, the speed will change to Press Speed.
Speed
[20]
Approach Distance
[54]
Load Hold
Time
[50] Slow Start Speed
[24] Press Speed
Start Distance
Or
[14] Press Speed
Start Load
[40]
Slow Start
Time
[22]
Target
Distance
Or
[13] Load
[53] Press Speed
[52] Part Search
Speed
[41] Approach
Speed
[53] Return Speed
Time/
Distance
Speed
[24] Press Speed
Start Distance
Or
[14] Press Speed
Start Load
[54]
Load Hold
Time
[50] Slow Start Speed
[20] Approach Distance [40]
Slow Start
Time
[22]
Target
Distance
Or
[13] Load
[53] Press Speed
[41] Approach
Speed
[53] Return Speed
Time/
Distance