AVerMedia Technologies LX5000 - Manual (Page 52)

AVerMedia LX5000 User’s Manual
103
7. Q: Why can’t I add a new mask?
A: You cannot add a new mask when previous masks are hidden.
8. Q: Do you offer a development kit for the LX5000 system?
A: We will provide Center SDK in the near future.
9. Q: Does LX5000 system record audio?
A: Not for the moment, but the audio functionality is in
development.
10. Q: How can I back up files?
A: You can mount the backup hard disk or RAID disk array through
Adaptec’s SCSI card.
11. Q: Why it does it always record when I use a B/W camera
configured with motion detection mode?
A: The motion detection sensitivity in the Recording Setup page
defaults to a color camera. You need to change the camera type
to be a B/W camera.
12. Q: Why does the camera name disappear from the screen?
A: Simply click on the camera name (upper left corner) again and it
will show up.
13. Q: Are there any special considerations when using RAID to back
up my files?
A: Remember to terminate the SCSI chain with a terminator. Also
when you change the number of the hard disks, or when you
swap them, you need to reset the system configuration or
format the hard disk.
AVerMedia LX5000 User’s Manual
104
Appendix A Registering Domain Name on
DDNS Server
DDNS (Dynamic Domain Name Service), a data query service chiefly
used on Internet for translating domain names into Internet addresses.
It is allowed the remote clients intelligently search dynamic servers
without any previous enquiring for servers’ Internet addresses.
In order to take advantage of the intelligent service, please first register
your domain name on the website: ddns.avers.com.tw
1. User Login
Browse the website ddns.avers.com.tw with Microsoft IE or
Netscape Navigator to access the following dialogue.
First input the serial number of your product and select the
product name. Then click OK to login or Reset to clear the
previous input.
2. Password
set a password to secure your identification.