AVerMedia Technologies LX5000 - Manual (Page 48)

AVerMedia LX5000 User’s Manual
95
If the port number has
been changed in server
end, please delete the
server and set a new one.
5. You will be prompted to click OK in the following window to into the
Camera Setup window once one of the users of server has been
deleted. About the instruction of the Camera Setup, please refer to
6.2.3 Camera Setup section.
6. Repeat the steps above to add a new server. The maximum numbers
of server are limited in 16 for the 16 channels.
6.3.2 Playback
Once in the playback mode, users can view log files recorded in the
local hard disks to show the following windows:
1. Click Playback to display the screen below.
2. From the cameras’ list shown in time diagram, choose the desired
camera folder first and the time folder by yy/mm/dd then.
AVerMedia LX5000 User’s Manual
96
Consequently, the files ranged within the selected time will be listed
in time sequence in the file directory.
The files are located on the local computer so that only the
enabled cameras by local user will be found in the file list.
3. Highlight the file you want to review and use the buttons below to
control the video playback.
Playback
Click this button to playback the selected file.
Reverse Playback. Pause
Move to Start Move to End
Previous Frame Next Frame