AVerMedia Technologies LX5000 - Manual (Page 43)

AVerMedia LX5000 User’s Manual
85
Display Mode
Select a display mode to arrange the presentation of the screen.
Full Screen 1 Channel
4 Channels 9 Channels 16 Channels
No matter what channel mode you choose, you can assemble the
channels as you wish by clicking Channel Status
to meet the
amount of the mode. For example, if you choose 4 channels mode, you
can click 4 channels (1,4, 8, 13), (3, 5, 7, 8), or other groups of the
channels to meet the quantity of 4 channels mode.
If a camera is disconnected to the server
or the signal from the server is
disconnected to the local camera, the
image will show as above on the screen.
The signal will be picked up at an
interval of one minute until it is
If a camera is not enabled, the image
from this camera will show as the
image above (gray scale) on the
screen.
AVerMedia LX5000 User’s Manual
86
6.2 Setup
6.2.1 User Management
User Management provides the easy management to safeguard the
system from the unidentified users. Only the root is authorized to
configure this section.
To achieve the setting, complete the following steps: