AVerMedia Technologies LX5000 - Manual (Page 45)

AVerMedia LX5000 User’s Manual
89
2. Change channel’s names by directly click on .
3. Arrow down the list to select the Server’s and Camera’s names for
each channel.
4. Check Display to show the images on the screen and Recording to
enable the recording function for each channel.
5. Click OK to save or Cancel to delete the previous arrangement.
The listed servers and cameras in the pull-down menu are
decided by the settings of the each of the servers.
6.2.4 Schedule Recording
The function allows you to plan the recording schedule by date or
weekday for all the channels.
Do the steps following:
1. Click Schedule
Recording to get the
window below:
AVerMedia LX5000 User’s Manual
90
2.Check the recording by date or by
weekday and choose the time by
clicking the arrow of the
box . The following
window will show as:
3.Click on the yy/mm position directly and use the upper left and upper
right arrows and the red circle in the bottom left corner window to
specify a date to be an operating time.
4.Click to confirm the time setting. A settled time will appear on
the right blank box. Click Delete to delete the previous time setting.
5.Set the Start and End time by the up and down arrows in Time
field.
6.Check the desired cameras to be involved into the schedule in
Camera field.
7.Mentioned comment is allowed by using Add/ Delete/ Update/
Restore buttons for the further information while recording.
8.Click Ok to save or Cancel to delete the previous arrangement.
Once the recording has been generated as the schedule, the recording
status is observed in Channel Status field.
6.2.5 Network Setup
If you want to transmit images for remote surveillance via TCP/IP,
first click this button to pop up the following dialogue.