AVerMedia Technologies LX5000 User Manual
Page 24
AVerMedia LX5000 User’s Manual
47
the further information.
Domain Name & Password
Enter the domain name and password given in the process of
registering a domain name or obtain them by asking network
administrator.
Modem Connecting Port: Please swat the modem connecting port in
this column.
AVerMedia LX5000 User’s Manual
48
When you install the fire wall, please enable the fire wall NAT
function (network address translation) for the connection of
image transmission. On the server side, the server port must be set as
default value: 9090(can be changed), and the server port of image
transmission must be set as 9191; For the Client side, the server port of
image transmission must be set as default value 9190.
When you set the LX5000 server in the LAN, if you want to
connect to the server through the internet, please specify the
server port (between 150 and 1023) at the HTTP server port.
Enter Save the modified values and parameters.
Cancel Quit the recording setting screen.
Alarm Setup
This button allows you to configure alarm setup in the following window.