Motorola MVME712A/D3 Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for MVME712A/D3 Motorola
Manuals 
| Recognized languages: | English |
|---|---|
| Pages: | 74 |
| Size: | 489 KB |
Show table of contents
Document Outline
- MVME712-12, MVME712-13, MVME712A, MVME712AM, and M...
- (MVME712A/D3)
- Notice
- Restricted Rights Legend
- Preface
- Safety Summary Safety Depends On You
- Introduction
- Features of the MVME712 Family Modules
- Features of the LCP2 Adapter Board
- Specifications
- General Description
- J8
- J16
- J16
- SCSI Termination
- MVME712B Module Preparation
- LCP2 Adapter Board Preparation
- Installation Instructions
- 1. Turn all equipment power OFF and disconnect the...
- Installing for Use with Internal SCSI Devices
- 1. Verify that SCSI terminators are installed on t...
- 2. Install the LCP2 adapter module to the backplan...
- 3. Connect a user-supplied cable with compatible p...
- 4. Verify that terminators are installed on the la...
- 5. MVME712-12 and MVME712-13: Attach the cable sup...
- 6. Insert the transition module into the selected ...
- 7. After making sure you will not pinch cables wit...
- 8. Connect the power cable to the AC power source ...
- 9. If SCSI does not work properly, you may have to...
- Figure 2-7. Internal SCSI and Serial Port Connecti...
- 1. Verify that SCSI terminators are installed on t...
- Installing the MVME712-13 and MVME712AM as a Modem...
- 1. Install the LCP2 adapter module to the backplan...
- 2. Verify that serial port 2 is configured as a mo...
- 3. MVME712-13: Attach the cable supplied with the ...
- 4. Connect a user-supplied cable from connector J2...
- 5. Insert the MVME712-13 or MVME712AM module into ...
- 6. After making sure you will not pinch cables wit...
- 7. Connect a user-supplied Telco modular cable to ...
- 8. Connect the power cable to the AC power source ...
- Figure 2-8. Internal SCSI and Modem Connections
- 1. Install the LCP2 adapter module to the backplan...
- MVME712B Installation
- 1. Verify that SCSI terminators are installed on t...
- 2. Install the LCP2 adapter module to the backplan...
- 3. MVME712-12 and MVME712-13: Attach the cable sup...
- 4. Connect the SCSI INTERFACE cable on the MVME712...
- 5. Connect the ETHERNET cable on the MVME712B to c...
- 6. Insert the MVME712B module into the selected sl...
- 7. Connect a user-supplied cable with compatible p...
- 8. Verify that terminators are installed on the la...
- 9. After making sure you will not pinch cables wit...
- 10. Connect the power cable to the AC power source...
- 11. If SCSI does not work properly, you may have t...
- Figure 2-9. MVME712B External SCSI Connections
- SUPPORT INFORMATION
- 1. Verify that SCSI terminators are installed on t...
- Introduction
- Interconnect Signals
- Table 3-1. LCP2 and MVME712 Connectors
- Table 3-2. MVME712 Jumpers
- Connector P2 Interconnect Signals (LCP2 Adapter)
- Connectors J1, J3-J5 Interconnect Signals (MVME712...
- Connector J2 Interconnect Signals (LCP2 Adapter)
- Connector J2 Interconnect Signals (MVME712-13, MVM...
- Connector J3 Interconnect Signals (LCP2 Adapter) C...
- Connector SCSI INTERFACE Interconnect Signals (MVM...
- Connector ETHERNET Interconnect Signals (MVME712B)...
- Connector J6 Interconnect Signals (MVME712-13, MVM...
- Connector J7 Interconnect Signals (MVME712-13, MVM...
- Connector J10 Interconnect Signals (MVME712x)
- Connector P2 and J11 Interconnect Signals (MVME712...
- Connector J12 Interconnect Signals (MVME712-13, MV...
- Connector J15 Interconnect Signals (MVME712x)
- Parts Lists and Locations
- Table 3-15. MVME712x Module Parts List (Continued)...
- Figure 3-1. MVME712-12 Parts Location Drawing (Pri...
- Figure 3-2. MVME712-13 Parts Location Drawing (Pri...
- Figure 3-3. MVME712A Parts Location Drawing (Prima...
- Figure 3-4. MVME712AM Parts Location Drawing (Prim...
- Figure 3-5. MVME712x Parts Location Drawing (Secon...
- Table 3-16. MVME712B Module Parts List
- Figure 3-6. MVME712B Parts Location Drawing
- Table 3-17. LCP2 Adapter Module Parts List
- Figure 3-7. LCP2 Adapter Module Parts Location Dra...
- Schematic Drawings
- General Description
- Modem Features
- Technical Specifications