HP ZT1100 - Manual (Page 59)

HP Pavilion zt1100/xz100 Omnibook xt1000 Removal and Replacement 2-37
Removing Notebook Components
(HP Authorized Service Providers Only)
Required Equipment
• #0 Phillips screwdriver.
• Small flat-blade screwdriver.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove the assemblies and follow the additional steps given in the table below.
Table 2-5. Removing Notebook Components
Component Removal Procedure Additional Steps
Antenna, Bluetooth See page 2-20.
Antenna, wireless See page 2-20.
Bezel, display See page 2-20.
Card, mini-PCI See page 2-16.
Case, bottom See page 2-32.
Case, top See page 2-27.
Cover, keyboard See page 2-9.
Display assembly See page 2-18.
Doors, docking Plug-in module (page 2-5).
Hard disk drive (page 2-6).
Keyboard cover
(page 2-9).
Keyboard (page 2-11).
SDRAM modules
(page 2-13).
Mini-PCI card (page 2-16).
Display assembly
(page 2-18).
Fan and heatsink
(page 2-22).
CPU module (page 2-25).
Top case (page 2-27).
Hinge saddles
(page 2-30).
Motherboard (page 2-32).
See Figure 2-24 on page 2-35.