Holder C 9.92 H - Manual (Page 204)

C 9.92 Operating Instructions
202 153 146
Maintenance every 500 service hours
Changing the engine oil filter
Refer the operating instructions of the engine manufacturer.
- Remove the left rear wheel and fender.
- Drain the engine oil.
- Unscrew the air filter cartridge (1) with a filter wrench.
ATTENTION
Observe the instructions for handling fuel, flu-
ids and lubricants.
- Clean the mating surface of the filter mount.
- Screw a new air filter cartridge with a new gasket in
the filter mount until the seal makes contact.
- Tighten the air filter cartridge half a turn.
- Top up with engine oil and check the oil level.
- Install the fender and rear wheel.
Bild_C992H_058
1