Holder C 9.92 H - Manual (Page 203)

Operating Instructions
153 146 201
C 9.92
Maintenance every 500 service hours
Changing the engine oil (at least once a year)
- Run the engine to operating temperature.
- Park the tractor on a level surface and switch off the
engine.
- Place a suitable catch pan under the engine.
CAUTION
Danger of scalding when draining hot engine
oil.
- Unscrew the oil drain plug (1).
- Allow the oil to drain completely.
ATTENTION
Observe the instructions for handling fuel, flu-
ids and lubricants.
- Screw the oil drain plug in again with a new sealing
ring and tighten to a torque of 55 Nm.
- Fill new engine oil through the filler neck (2). Only use
recommended engine oil.
Filling quantity with filter .................................... 10.5 L
- Let the engine idle for a short time.
- After approx. 1 minute, check the oil level with the
dipstick (3).
Bild_C992H_067
2
3
Bild_C992H_068
1