Holder C-Trac 4.74 User Manual
Operating instructions, C-trac 4.74
Table of contents
Document Outline
- Alphabetical index
- A
- Accessories
- Additional information on implements
- Adjust the driver's seat with mechanical suspension
- Adjust the steering wheel
- Adjusting the backrest inclination
- Adjusting the driver's seat with pneumatic suspension
- Adjusting the driver's weight
- Adjusting the fine control knob
- Adjusting the horizontal suspension
- Adjusting the hysteresis
- Adjusting the length of the pintle hook bar
- Adjusting the lumbar padding
- Adjusting the pintle hooks and pintle hook bars
- Adjusting the seat horizontally
- Adjusting the speedometer
- Adjusting the track width
- Adjusting the upper link
- Air conditioning
- Annual maintenance
- Applying the parking brake
- Applying the service brake
- Attaching implements
- B
- C
- Change hydraulic oil for traction and working hydraulics
- Change the brake fluid of the foot brake
- Change the engine oil
- Change the engine oil filter
- Change the fuel filter and fuel prefilter
- Change the toothed belt
- Changing the direction of travel
- Check / clean the suction filter for working hydraulic system
- Check and clean the cooler and debris screens
- Check engine valve clearances
- Check hose couplings for leaks
- Check the air cleaner system
- Check the battery
- Check the battery and cable terminals
- Check the brake fluid level
- Check the brake fluid level for the foot brake
- Check the brakes and steering for proper operation
- Check the braking system
- Check the cooling system
- Check the electrical system
- Check the engine for leaks
- Check the heating system
- Check the high pressure hoses
- Check the hydraulic oil level
- Check the injection nozzles
- Check the lights and rear view mirror
- Check the steering cylinder and orbitrol
- Check the tire inflation pressure
- Check the trailer hitch (option) if required
- Check V-belt tension and condition
- Clean / replace the fuel pump strainer
- Clean the cooling system
- Clean the fresh air filter
- Clean with cold cleaner or pressure washer
- Clean with compressed air
- Cleaning the condenser
- Connecting equipment to the power socket
- Connecting hydraulic lines
- Controls in cabin at front bottom
- Controls in cabin at front top
- Controls in cabin at rear
- D
- Daily checks and services prior to taking into operation
- Date of issue and manual version
- Description
- Development
- Dimensional drawing
- Disengaging the differential lock
- Door controls
- Driver's licence
- Driver's licence classes
- Driver's station
- Driving
- Driving on slopes
- Driving on-road with implement cushioning
- Driving with hydrostatic drive and digital electronics
- Driving with SDS (Special Drive System)
- Driving with trailers
- E
- F
- G
- H
- I
- J
- L
- M
- Maintenance after the first 50 hours
- Maintenance as required
- Maintenance data
- Maintenance during the first period of operation
- Maintenance every 1000 hours
- Maintenance every 125 hours
- Maintenance every 1500 hours
- Maintenance every 3000 hours
- Maintenance every 500 hours
- Maintenance schedule
- Mounting instructions for licence plates
- Multifunctional display, legend
- Multiple-axle trailers or two-axle trailers with an axle base over 1 metre
- N
- O
- Oil preheating
- Opening the roof hatch
- Operating controls
- Operating instructions
- Operating priority flow valve I
- Operating priority flow valve II
- Operating the air conditioning
- Operating the blue hydraulic couplings
- Operating the driver's cab
- Operating the front power lift
- Operating the front power lift with keyboard
- Operating the green hydraulic couplings
- Operating the hazard warning flasher system
- Operating the horn
- Operating the hydraulic couplings
- Operating the hydraulic cushioning (front power lift)
- Operating the hydraulic dumper
- Operating the implements
- Operating the inching pedal
- Operating the joystick
- Operating the radio
- Operating the rear power lift
- Operating the roof hatch
- Operating the sideshift with the keyboard
- Operating the tilting device with the keyboard
- Operating the trailer hitch automatically, attaching trailers
- Operating the trailer hitch manually, attaching trailers
- Operating the variable pump for implements (setting from-0-100 litres)
- Operating the yellow and white hydraulic couplings
- Operation
- Operation in winter
- Operation with implement cushioning
- Other activities
- Overview of options and variants (selection)
- P
- Pedals
- Periodic maintenance
- Possible implements
- Power socket
- Problems in electronic and hydraulic driving systems
- Problems in engine and exhaust gas turbocharger
- Problems in the hydraulic system and steering
- Problems in the working hydraulic system
- Putting on snow chains
- Putting the vehicle back in service after lay-up
- Q
- R
- Radio and loudspeakers
- Rear console controls
- Rear implement or front/rear combinations
- Rear right view
- Recommended engine oils and greases
- Recommended engine oils and lubricants, continued
- Recommended hydraulic and gear oils
- Releasing the parking brake
- Removal of hydraulic oil for stationary operation
- Remove engine preservation
- Removing implements
- Removing the roof hatch
- Residual hazards and risks
- Right front controls console
- Right rear console controls
- Routine maintenance
- S
- Safety
- Safety instructions for handling implements
- Safety notes for later installations
- Safety notes for maintenance
- Safety precautions for handling fuels and oils
- Securing the dump body (loading platform)
- Selecting on-road travel (transport speed)
- Service
- Setting the working speed of programs 3 and 4
- Shutdown
- Sideshifting the front power lift
- Signalling to the left, signalling to the right
- Single-axle trailers or two-axle trailers with axle base of up to 1 metre maximum
- Site of operation
- Special operating instructions
- Start the engine
- Starting the engine
- Stationary operation
- Steering
- Steering wheel adjustment
- Stopping
- Switching the front power lift to double-acting
- T
- Table of dimensions C 4.74
- Table of driving programs
- Table of driving ranges
- Table of noise levels and absorption rating
- Table of trailers
- Taking into operation
- Taking out of operation
- Technical data
- Technical data /filling quantities
- Theoretical driving speeds
- Tighten nuts and bolts
- Tighten wheel nuts
- Tightening torques
- Tilting the cab
- Tilting the front power lift
- Tires
- Toggle button for Float Position Button
- Towing instructions
- Track widths
- Tractors for farming and forestry (also with implements)
- Trailers, towing
- Transport, hoisting, towing
- Transport safety
- Troubleshooting guide
- Turn on the battery isolating switch
- Turning off the implement variable-displacement pump
- Turning off the priority flow valve
- Turning on and operating the lights
- Turning on high beam
- Turning on the flood light
- Turning on the front PTO
- Turning on the heater
- Turning on the interior light
- Turning on the rear PTO
- Turning on the rotating beacon
- Turning on the top headlights
- Turning on the ventilation
- Turning on windshield wiper/washer
- Turning the implement cushioning off
- Two trailers behind tractors for farming and fores
- Two-stage steering
- U
- V
- W
- A