HP 10000s - Manual (Page 48)

a. Select OFF or ON using the or keys.
b. Press the OK key to confirm the selection.
16. Select a media type.
a. Select the media type using the or keys.
There are five preset media types to choose from:
● Paper
● Glossy
● Matte
● Banner
● BLT_B (Backlit)
b. Press the OK key to confirm.
NOTE If you wish to select a media type that is currently not available, then you will
need to create a new media type.
c. If required, select the NEW MEDIA ENTRY option using the or key and press the OK key
(Refer to Manage media types ).
Press the Cancel key to return to the SELECT MEDIA menu.
17. Install the tension bar. For full details of how to prepare the tension bars (Refer to Tension bars ).
CAUTION Do not mount the flanges on the tension bar.
a. Adjust the tension bar (1) length to half the media width.
38 Chapter 2 How do I perform basic media operations? ENWW
How
do
I p
erf
or
m b
asic m
edia
o
p
erat
ions?