HP 6200YL User Manual
Page 264

IPv6 Access Control Lists (ACLs)
Creating or Editing ACLs Offline
ProCurve(config)# show run
. . .
ipv6 access-list "acl-001"
10 remark "Telnet Denied Here"
10 deny tcp ::/0 ::/0 eq 23
30 deny tcp ::/0 ::/0 log
40 deny icmp ::/0 ::/0 134
50 deny icmp ::/0 ::/0 133
60 permit ipv6 ::/0 ::/0
exit
. . .
vlan 20
ipv6 access-group "acl-001" vlan
exit
. . .
As a part of the instruction set
included in the .txt file, the ACL is
assigned to inbound IP traffic on
VLAN 20.
Note that the comment preceded by
“ ; “ in the .txt source file for this
configuration do not appear in the
ACL configured in the switch.
Figure 8-36. Example of Verifying the .txt File Download to the Switch
5. If the configuration appears satisfactory, save it to the startup-config file:
ProCurve(config)# write memory
8-88