HP 6200YL - Manual (Page 139)

IPv6 Management Security Features
Authorized IP Managers for IPv6
Configuring Authorized IP Managers for Switch Access
To configure one or more IPv6-based management stations to access the
switch using the Authorized IP Managers feature, enter the
ipv6 authorized-
managers command
Syntax: [no] ipv6 authorized-managers [ipv6-mask] [access
| manager>] access-method [all | ssh | telnet | web | snmp | tftp]
Configures one or more authorized IPv6 addresses to access
the switch, where:
ipv6-mask specifies the mask that is applied to an IPv6 address
to determine authorized stations. For more information, see
“Using a Mask to Configure Authorized Management Stations”
on page 6-5. Default:
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF.
access specifies the level of access privilege
granted to authorized stations. Applies only to access through
telnet, SSH, and SNMP (version 1,2, and 3). Default:
Manager.
access-method [all | ssh | telnet | web | snmp | tftp] configures
access levels by access method and IP address. Each
management method can have its own set of authorized
managers. Default:
All
Using a Mask to Configure Authorized Management
Stations
The ipv6-mask parameter controls how the switch uses an IPv6 address to
determine the IPv6 addresses of authorized manager stations on your net­
work. For example, you can specify a mask that authorizes:
■ Single station access
■ Multiple station access
N o t e Mask configuration is a method for determining the valid IPv6 addresses that
are authorized for management access to the switch. In the Authorized IP
Managers feature, the mask serves a different purpose than an IPv6 subnet
mask and is applied in a different manner.
Configuring Single Station Access
To authorize only one IPv6-based station for access to the switch, enter the
IPv6 address of the station and set the mask to
FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF:FFFF.
6-5