Configuring an ipv6 address for an sntp server, Configuring an ipv6 address for an sntp server -11 – HP 6200YL User Manual
Page 115
IPv6 Management Features
SNTP and Timep
[ no ]sntp
Enables SNTP with the current SNTP configuration.
The no version disables SNTP without changing the
current SNTP configuration.
sntp < unicast | broadcast >
Configures the SNTP mode. (Default: Broadcast)
sntp < 30 - 720 >
Changes the interval between time requests.
(Default: 720 seconds)
Configuring an IPv6 Address for an SNTP Server
N o t e
To use a global unicast IPv6 address to configure an IPv6 SNTP time server
on the switch, the switch must be receiving advertisements from an IPv6
router on a VLAN configured on the switch.
To use a link-local IPv6 address to configure an IPv6 SNTP time server on the
switch, it is necessary to append
%vlan followed immediately (without spaces)
by the VLAN ID of the VLAN on which the server address is available. (The
VLAN must be configured on the switch.) For example:
fe80::11:215%vlan10
5-11