HP 6200YL - Manual (Page 166)

Multicast Listener Discovery (MLD) Snooping
Displaying MLD Status and Configuration
Displaying MLD Status and
Configuration
Current MLD Status
Syntax: show ipv6 mld
Displays MLD status information for all VLANs on the switch
that have MLD configured.
show ipv6 mld vlan
Displays MLD status for the specified VLAN
vid—VLAN ID
For example, a switch with MLD snooping configured on VLANs 8 and 9 might
show the following information:
ProCurve# show ipv6 mld
MLD Service Protocol Info
Total vlans with MLD enabled : 2
Current count of multicast groups joined : 37
VLAN ID : 8
VLAN NAME : VLAN8
Querier Address : fe80::218:71ff:fec4:2f00 [this switch]
Querier Up Time : 1h:37m:20s
Querier Expiry Time : 0h:1m:44s
Ports with multicast routers :
Active Group Addresses Type ExpiryTime Ports
---------------------------------------- ---- ---------- --------------------
ff02::c FILT 0h:4m:9s A15-A21
ff02::1:2 FILT 0h:4m:3s A21
ff02::1:3 FILT 0h:4m:9s A15-A21
ff02::1:ff00:42 FILT 0h:4m:0s A19
ff02::1:ff02:2 FILT 0h:4m:2s A15
ff02::1:ff02:3 FILT 0h:4m:5s A16
ff02::1:ff03:2 FILT 0h:4m:2s A17
ff02::1:ff03:3 FILT 0h:4m:5s A18
Figure 7-4. Example of Displaying the MLD Configuration for All Static VLANs on the Switch
7-12