HP 6200YL - Manual (Page 245)

IPv6 Access Control Lists (ACLs)
Editing an Existing ACL
ProCurve(config)# show access-list My-List config
ipv6 access-list "My-List"
10 permit ipv6 fe80::100/128 ::/0
20 deny ipv6 fe80::110/128 fe80::/124
40 permit ipv6 ::/0 ::/0
exit
ProCurve(config)# ipv6 access-list resequence My-List 100 100
ProCurve(config)# show access-list config
ipv6 access-list "My-List"
100 permit ipv6 fe80::100/128 ::/0
200 deny ipv6 fe80::110/128 fe80::/124
300 permit ipv6 ::/0 ::/0
exit
Figure 8-22. Example of Viewing and Resequencing an ACL
Attaching a Remark to an ACE
A remark is numbered in the same way as an ACE, and uses the same sequence
number as the ACE to which it refers. This operation requires that the remark
for a given ACE be entered prior to entering the ACE itself.
8-69