beautypg.com

Print quality, Print density, Paper types – HP 2700 User Manual

Page 78

background image

Print quality

Use the HP ToolboxFX print-quality options to improve the appearance of your print jobs. These are the
same options that are available on the control panel. For more information, see

Using the control-panel

menus

.

The following options are provided for controlling print quality:

Color Calibration

Power On Calibration. Specify whether the printer should calibrate when you turn it on.

Calibration Timing. Specify how frequently the printer should calibrate.

Calibrate Now. Set the printer to calibrate immediately.

NOTE

You must click Apply before your changes take effect.

Print density

Use the print density settings to make fine adjustments in the amount of each color of toner that is used
for your printed documents.

Contrasts. Contrast is the range of difference between light (highlight) and dark (shadow) colors.
To increase the overall range between light and dark colors, increase the Contrasts setting.

Highlights. Highlights are colors that are nearly white. To darken highlight colors, increase the
Highlights setting. This adjustment does not affect midtone or shadow colors.

Midtones. Midtones are colors that are halfway between white and solid density. To darken
midtone colors, increase the Midtones setting. This adjustment does not affect highlight or shadow
colors

Shadows. Shadows are colors that are nearly solid density. To darken shadow colors, increase
the Shadows setting. This adjustment does not affect highlight or midtone colors.

Paper types

Use the HP ToolboxFX Paper types options to configure print modes that correspond to the various
media types. When you select Restore modes, all of the modes are reset to the factory settings.

NOTE

You must click Apply before your changes take effect.

68

Chapter 5 Managing the printer

ENWW

This manual is related to the following products: