HP 2700 - Manual (Page 72)

Tab or section Description
Settings tab
Provides the ability to configure the
printer from your computer.
● Device Information: Allows you to name the printer and assign an asset number to
it. Enter the name for the primary contact who will receive information about the
printer.
● Paper Handling: Allows you to change the paper-handling defaults for the printer.
● Printing: Allows you to change the printing defaults for the printer.
● PCL 5c: Allows you to change the PCL 5c defaults for the printer.
● PostScript: Allows you to change the PostScript defaults for the printer.
● Print Quality: Allows you to change the print quality defaults for the printer, including
calibration settings.
● Print Density: Allows you to change the contrasts, highlights, midtones, and
shadows values for each supply.
● Paper Types: Allows you to configure print modes that correspond to the media
types that the printer accepts.
● System Setup: Allows you to change the system defaults for the printer
● Service: allows you to start the cleaning procedure on the printer.
● Support button: Provides a link to the product support page. The Support button
can be password-protected.
● Shop for Supplies button: Provides a link to a page where you can order supplies
for the printer. The Shop for Supplies button can be password-protected.
NOTE The Settings tab can be password-protected. If this printer is on a
network, always consult with the printer administrator before changing settings
on this tab.
Networking tab
Provides the ability to change
network settings from your
computer.
Network administrators can use this tab to control network-related settings for the printer
when it is connected to an IP-based network. This tab does not appear if the printer is
directly connected to a computer.
NOTE The Networking tab can be password-protected.
62 Chapter 5 Managing the printer ENWW