HP 2700 - Manual (Page 35)

Service menu
Use this menu to restore default settings, clean the printer, and activate special modes that affect print
output.
Menu item Description
Restore defaults Sets all customized settings to the factory default values.
Cleaning mode Use this option to clean the printer if you see toner specks or other marks on the
printed output. The cleaning process removes dust and excess toner from the paper
path.
When you select this item, the printer prompts you to load plain paper in tray 1 and
then press
OK to start the cleaning process. Wait until the process is complete.
Discard the page that prints.
USB speed Sets the USB speed to high or full. For the printer to actually operate at high speed,
it must have high speed enabled and be connected to an EHCI host controller which
is also operating at high speed. This menu item also does not reflect the current
operating speed of the printer.
Less paper curl If printed pages are consistently curled, use this option to set the printer to a mode
that reduces curl.
The default setting is Off.
Archive print If you are printing pages that will be stored for a long time, use this option to set the
printer to a mode that reduces toner smearing and dusting.
The default setting is Off.
ENWW Using the control-panel menus 25