Software program problems – HP 2700 User Manual
Page 131
Software program problems
Cannot change system selections
Cause
Solution
The software program does not support system changes.
See the software program documentation.
The correct printer driver is not loaded.
Load the correct printer driver.
The correct program driver is not loaded.
Load the correct program driver.
Cannot select a font from the software
Cause
Solution
The font is not available to the software program.
See the software program documentation.
Cannot select colors
Cause
Solution
The software program does not support color.
See the software documentation.
Color mode is not selected in the software program or printer
driver.
Select Color mode instead of Grayscale or Monochrome
mode.
The correct printer driver is not loaded.
Load the correct printer driver.
Printer driver does not recognize tray 3
Cause
Solution
The printer driver has not been configured to recognize tray 3. See the printer driver online Help for instructions to configure
the driver to recognize printer accessories. See
The accessory might not be installed.
Verify that the accessory is installed correctly.
ENWW
Software program problems
121