HP 2700 - Manual (Page 113)

12. Hold the fuser with your thumbs on the latches, and then push both sides of the fuser into the
printer. Press the fuser down until it clicks into place.
13. Close the top cover and then turn on the printer.
Jam in output bin
For this control-panel message, look in two places for jams. First, check the output bin area for a jam.
Next, starting with step 3, check the top cover area.
1. Look for jammed paper in the output bin area.
2. Remove any visible media.
NOTE If the sheet tears, make sure that all fragments are removed before resuming
printing.
ENWW Jams 103