HP 2700 - Manual (Page 73)

Using the HP ToolboxFX
The HP ToolboxFX is a program that you can use to complete the following tasks:
● Check the printer status.
● Configure the printer settings.
● Configure pop-up-alert messages.
● View troubleshooting information.
● View online documentation.
You can view the HP ToolboxFX when the printer is directly connected to your computer or when it is
connected to the network. You must perform a typical software installation to use the HP ToolboxFX.
NOTE The HP ToolboxFX is not supported for Windows Server 2003 or Macintosh operating
systems. To use the HP ToolboxFX, you must have TCP/IP protocol installed on your computer.
NOTE You do not have to have Internet access to open and use the HP ToolboxFX.
To view the HP ToolboxFX
Open the HP ToolboxFX in one of these ways:
● In the Windows system tray, double-click the HP ToolboxFX icon.
● On the Windows Start menu, click Programs (or All Programs in Windows XP), click HP, click
HP Color LaserJet 2700 Series, and then click HP ToolboxFX.
The HP ToolboxFX software contains the following sections:
● Status
● Alerts
● Help
● Device settings
● Network settings
ENWW Using the HP ToolboxFX 63