HP 1100dtn - Manual (Page 37)

ENWW 2-13
Performing automatic duplexing
When printing is complete on one side of the paper, the printer holds the paper and pauses
while the ink dries. Once the ink is dry, the paper is pulled back into the printer and the second
side of the paper is printed. When printing is complete, the paper is dropped on to the output
tray.
For more information on setting print options, see “Changing printer settings” .
To perform automatic duplexing (Windows)
1 Load the appropriate paper in Tray 1 or Tray 2. Be sure to load the paper with the print
side up.
2 On the File menu, click Print, and then click Properties. (The actual steps can vary; this
is the most common method.)
3 On the Finishing tab, select the Print on Both Sides check box. Make sure that the
Automatic check box is selected.
4 When duplexing, the top margin might need to be increased slightly to make sure the
pages align. Select the Preserve Layout check box to reduce the margins so that the
page prints on a single sheet. Clear this check box if you prefer that the page print on
more than one sheet with full margins.
5 Select or clear the Flip Pages Up check box depending on which way you want the
binding. See the graphics in the printer driver for examples.
6 Click OK to close the dialog box.
7 Click OK to print.
To perform automatic duplexing (Mac OS 8.6 to 9.x)
1 Load the appropriate paper in Tray 1 or Tray 2. Be sure to load the paper with the print
side down.
2 On the File menu, click Print.
3 On the Layout panel, select the Print Both Sides check box, select the binding
orientation you want (select the desired icon), and select Automatic.
4 Click OK.
To perform automatic duplexing (Mac OS X)
1 Load the appropriate paper in Tray 1 or Tray 2. Be sure to load the paper with the print
side up.
2 On the File menu, click Print.
3 On the Two Sided Printing panel, select the Print Both Sides check box, the binding
orientation you want (select the desired icon), and select Automatic.
4 Print the document.