HP 1100dtn - Manual (Page 29)

ENWW 2-5
Loading media
This section contains instructions for loading media into Tray 1 or Tray 2. To load a single card
or envelope in the envelope slot, see
“Printing on envelopes and cards” .
To load Tray 1 or Tray 2
1 Pull the tray out of the printer.
2 If you are loading paper in Tray 1 raise and remove the output tray.
3 To load paper between 11 inches (279 mm) and 14 inches (356 mm) long, move the latch
on the tray to the right and lower the front of the tray. (You do not need to lower the front of
the tray for letter-size or A4-size paper.)