Setting minimum margins, Setting minimum margins -4 – HP 1100dtn User Manual
Page 28
2-4
ENWW
Setting minimum margins
The document margins must match (or exceed) these minimum margin settings in portrait
orientation. The illustration below shows which side of the paper and envelope corresponds to
each margin.
Note
When you are using the auto-duplex unit, the minimum top and bottom margin must match or
exceed 0.46 inch or 11.7 mm.
Media
Left margin
Right margin
Top margin
Bottom margin
Letter, legal, executive,
banner (letter)
0.25 inch
(6.4 mm)
0.25 inch
(6.4 mm)
0.12 inch
(3.0 mm)
0.50 inch
(12.7 mm)
A4, A5, ISO B5, cards,
banner (A4)
0.13 inch
(3.4 mm)
0.13 inch
(3.4 mm)
0.12 inch
(3.0 mm)
0.50 inch
(12.7 mm)
HP Greeting Card
Envelope
0.12 inch
(3.0 mm)
0.13 inch
(3.4 mm)
0.50 inch
(12.7 mm)
0.50 inch
(12.7 mm)
All other size envelopes
0.13 inch
(3.4 mm)
0.13 inch
(3.4 mm)
0.50 inch
(12.7 mm)
0.50 inch
(12.7 mm)
Custom-size media
0.12 inch
(3.0 mm)
0.12 inch
(3.0 mm)
0.12 inch
(3.0 mm)
0.50 inch
(12.7 mm)
Photo (4 by 6 inches, or
101.6 by 152.4 mm) with
tear-off tab
0.13 inch
(3.4 mm)
0.13 inch
(3.4 mm)
0.12 inch
(3.0 mm)
0.12 inch
(3.0 mm)
Top
Bottom
Right
Left
Left
Top
Bottom
Right