HP 3550 User Manual
Page 153
Control panel message
Description
Recommended action
Calibrating...
The printer is calibrating.
No action necessary.
Canceling...
The printer is in the process of canceling
a job. The message will continue to be
displayed while the job is stopped, the
paper path flushed, and any remaining
incoming data on the active data
channel is received and discarded.
No action necessary.
CANNOT DUPLEX
CHECK REAR BIN
alternates with
CANNOT DUPLEX
CHECK PAPER
The lower rear door (rear output bin)
was opened during the automatic duplex
job, or the printer detected a paper size
that will not go through the auto-duplexer.
For the HP Color LaserJet 3700dn and
3700dtn printer models only.
Close the lower rear door (rear output
bin) or load paper that is supported for
auto-duplexing. See
CANNOT DUPLEX
close rear bin
A 2-sided print job has been sent to the
printer while the lower rear door (rear
output bin) is open.
For the HP Color LaserJet 3700dn and
3700dtn printer models only.
Close the lower rear door (rear output
bin).
Checking paper path
The engine is turning its rollers to check
for possible paper jams.
No action necessary.
Checking printer
The engine is doing an internal test.
No action necessary.
CHOSEN PERSONALITY
NOT AVAILABLE
alternates with
To continue press
The printer encountered a request for a
personality that did not exist in the
printer. The job is aborted and no pages
will be printed.
1.
Press to continue.
2.
Try a different driver.
Cleaning...
The printer is in the process of cleaning.
No action necessary.
Clearing event log
This message is displayed while the
event log is cleared. The printer will back
up one screen to Service Menu upon
completion of printing the page.
No action necessary.
Clearing paper path
The printer jammed or detected
misplaced paper when turned on. The
printer is attempting to eject jammed
pages automatically.
No action necessary.
CLOSE FRONT DOOR
The front door needs to be closed.
Close the front door.
CLOSE UPPER REAR DOOR
The upper rear door is open.
Close the upper rear door.
Creating...
CLEANING PAGE
The printer is generating a cleaning
page. The printer returns to the Ready
state when the cleaning page is finished
printing.
1.
Press
M
ENU
to enter the menus.
2.
Load the cleaning page into Tray 1.
3.
Select PROCESS CLEANING
PAGE.
DATA RECEIVED
alternates with
Ready
The printer received data and is waiting
for a form feed. When the printer
receives another file, the message
should disappear.
Press to continue.
Control panel messages (continued)
ENWW
Control panel messages
141