Replacing the transfer kit – HP 3550 User Manual

Page 127

6. Align the print cartridge with the tracks inside the printer, and using the handle, insert the

print cartridge until it is firmly seated.

7. Firmly close the front door.

After a short time, the control panel should display Ready.

NOTE

If a cartridge is in the wrong slot or the wrong type for the printer, the control panel will
display the message INCORRECT CARTRIDGE or Incorrect supplies.

8. Installation is complete. Place the used print cartridge in the box in which the new

cartridge arrived. See the enclosed recycling guide for recycling instructions.

9. If you are using a non-HP print cartridge, check the printer control panel for further

instructions.

For additional help, go to

http://www.hp.com/support/clj3550

for the HP Color LaserJet 3550

series printer or to

http://www.hp.com/support/clj3700

for the HP Color LaserJet 3700 series

printer.

Replacing the transfer kit

Replace the transfer kit when the printer control panel displays a REPLACE TRANSFER
KIT message. The image transfer kit contains a replacement transfer unit for this printer.

ENWW

Replacing supplies and parts

115

This manual is related to the following products:

3700 series