HP 16V - Manual (Page 23)

Setting Up
To prepare the print unit and install the toner bottle, follow these
steps:
Projecting guide
1.
2.
3.
4.
5.
Open the upper door. Lift
the milled portions at the
Front left and right of the
upper door to open it.
Remove the protective
materials from the print
unit. Remove protective
sheet 1 Pull clear tape 2
until its blue end is visible
and remove it. Remove two
restraint cushions 3
Remove the toner bottle
from its bag.
Shake the toner bottle by
moving it back and forth
in a horizontal motion
several times.
Remove the plastic seal
from the toner bottle.
Gently pull off the seal
being careful not to spill
toner. Handle to seal
carefully to avoid staining
your hands or clothes.
1- 8
User’s Manual