HP 16V - Manual (Page 20)

Getting Ready
Use only the power cord
furnished with the printer.
Do not use an extension
cord.
Do not touch any
connector contacts and
corona wires to avoid
possible electrostatic
damage to the printer.
Do not use a circuit shared
with equipment that causes
electrical noise, such as
motors.
Do not use a circuit shared
with equipment that uses a
lot of power, such as a
copier or a coffee maker.
Unpacking and Checking Your Printer
As you unpack the printer, check each item carefully for damage. If
you find damage, notify your dealer. Check also that you have
received all the items shown below.
This printer comes with everything you need except an interface
cable. If you do not yet have a cable, you must purchase one before
you can connect the printer to your computer.
Important:
Save the original carton and packing materials in case you need to
store or transport your printer.
User’s Manual 1-5