HP 660LX - Manual (Page 157)

HP Palmtop PC User Guide - 147
This indicates that the international access code should be dialed and then
after a pause the country code, area code and local number. i.e. “001,EFG”
or “9,001,EFG”. When you have finished tap OK to leave the dialing patterns
and communications windows.
Example of dialing patterns are listed below:
US: If you need to dial a phone number that is in your area code but still requires
a “1” and the area code (long distance) to dial it, you need check the “Force Long
Distance” box when you “Make a New Connection.” To change a Dial-Up Con-
nection that is already made:
- Tap Start and Programs
- Double-tap Communications and Remote Networking
- Tap to highlight the connection to be changed.
- Tap File, then Properties.
- Tap Force Long Distance box.
France1: Use this dialing pattern if you have put in the entire telephone number
minus the leading 0 in the telephone number field and left the area code
field blank.
France2: Use this dialing pattern if you have put the one-digit area code (without
the leading 0) in the area code field and the 8-digit number in the phone
number field.
To set up manual dialing:
If you need to use a dialing string which has more than 32 characters (e.g. when
using a calling card), or if the dialing string contains special characters and com-
mands, you will need to dial manually to make the modem connection:
1. Tap Start, then tap Programs, and then double-tap the Communications folder.
2. Double-tap the Remote Networking folder, then tap to highlight the
connection which you want to set up for manual dialing.
3. Tap File, then tap the Properties button on the toolbar.
Working with Pre-Installed Applications
Country
Singapore
Malaysia
US
France1
France2
UK
Local
G
G
G
0G
0FG
0FG
Long Distance
G
0FG
1FG
0G
0FG
0FG
International
001, EFG
001, EFG
011, EFG
00, EFG
00, EFG
00, EFG