HP 660LX User Manual
Page 119
HP Palmtop PC User Guide - 109
2. It may be that your station ID name is too long for your modem to handle. If
your station ID is more than 20 characters long and you’ve received this error,
try using a shorter name. Choose Preferences from the Options menu and edit
the Station ID field under the Identification tab.
3. There may be letters or non-standard characters in the phone number which
some fax modems cannot dial. Try converting your Recipient phone number to
all numbers and hyphens.
When sending a fax, bFAX™ seems to stop while it’s configuring the mo-
dem for faxing.
The palmtop PC may be having problems communicating with your modem. First
make sure the modem is correctly inserted and locked into your palmtop PC. Try
removing, reinserting and locking your modem. If the problem persists, turn your
palmtop PC off for a few moment before trying again.
When should I configure bFAX™ to use hardware flow control?
If you cannot successfully send a fax, it may be necessary to configure bFAX™
to “Use hardware flow control when communicating with the modem.” This op-
tion can be configured by choosing Communications from the Options menu and
then selecting the Modem tab. Typically, this is only necessary when using mo-
dems that are not officially supported by Windows CE operating system. It is not
recommended that you use this setting if you can successfully send a fax modem.
If you must enable this setting you may need to reduce the baud rate in order to
fax successfully.
More information
Visit bsquare development’s World Wide Web site at www.bsquare.com/develop-
ment for additional product news and tips.
BSQUARE CORPORATION makes no warranty as to the accuracy or completeness of the foregoing material and
hereby disclaims any responsibility thereof. Microsoft and Windows are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries. bFAX, bsquare Fax, and bsquare View are
trademarks of bsquare development.
Working with Pre-Installed Applications