Hitachi CP-X268AWF - Manual (Page 97)

18
2. Equipment connection and network setting
2.4 Manual network connection setting – In case of wireless LAN - (Continued)
4) Set used protocol as “TCP/IP” and open TCP/IP property. Set IP address and
other settings as same as wired LAN connection set up. ( 12)
5) Open “Wireless Networks” tab. (Fig. 2.4.2.c)
Fig. 2.4.2.c “Wireless Network Connection Properties” window (2)
Fig. 2.4.2.d “Wireless network Properties” window
$GGFKHFNPDUNIRU³8VH:LQGRZVWRFRQ¿JXUHP\ZLUHOHVVQHWZRUNVHWWLQJV´
in “Wireless Network Connection Properties” window.
7) Click “Add” button in “Preferred networks” section in “Wireless Network
Connection Properties” window (Fig. 2.4.2.c) to open “Wireless Network
Properties” window. (Fig. 2.4.2.d)