Hitachi CP-X268AWF User Manual

Page 124

3. How to use Projector software – Basics -

3.1.2. Software Installation Procedure

1) Turn on the PC.
2) Shut down all applications.
3) Insert the accompanying CD-ROM into the

PC's CD-ROM drive.

4) After a moment, the Welcome to MIU Utilities

Setup dialog will appear as shown on the right.
Press Next.

If the Welcome to MIU Utilities Setup dialog doesn't appear, proceed as

follows:
(1) Click on the Start button on the toolbar and select Run.
(2) Enter E:\software\setup.exe and then press OK.

NOTE

If your CD-ROM drive is not drive E on your PC, you will need to
replace E with the correct drive letter assigned to your CD-ROM
drive.

5) The Choose Destination Location dialog

appears. Press Next.

7KH&?3URJUDP)LOHV?0,8B8WLOLW\IROGHUZLOOEHFUHDWHGDQGWKH

program will be installed into that folder.
• If you wish to install to a different folder, click Browse and select another folder.

NOTE

&RQ¿UPWKHSURJUDPIROGHUQDPH
,I0,8B8WLOLW\LVRND\SUHVV1H[WWRFRQWLQXH
If not, enter the desired folder name and then

press Next.

+RZWRXVH³0,8/LYH9LHZHU´&RQWLQXHG

If software has been already installed, Uninstallation will be done. Click the cancel
button, then uninstallation will be canceled. If you uninstalled the software by mis-
RSHUDWLRQSOHDVHUHLQVWDOOWKHVRIWZDUHIURP¿UVWSURFHGXUH