Hitachi CP-X268AWF - Manual (Page 64)

55
Item Description
SETUP
MODE
Select the communication connection control
method to use between the PC and projector.
Match to your PC’s settings.
8VHWKHŸźEXWWRQVWRVHOHFWWKH02'(WREH
used.
ADHOC Ù INFRASTRUCTURE
CH
Select the channel when using a wireless LAN
connection.
(Channels 1 to 11 are available)
*The available channels would be various
depending on a country. In addition, wireless
LAN card might be required due to the standard.
ENCRYPTION
Select the encrypting method.
8VHWKHŸźEXWWRQVWRVHOHFWWKHHQFU\SWLRQ
method to be used.
WPA2-PSK(AES)
Ú
WPA-PSK(AES)
Ù WPA-PSK(TKIP) Ù WEP 128bit Ù WEP 64bit Ù OFF
SPEED
8VHWKHŸźEXWWRQVWRVHOHFWWKHWUDQVIHUUDWH
AUTO Щ54Щ48Щ36Щ24Щ18Щ12Щ11Щ9Щ6Щ5.5Щ2Щ1 (Mbps)
• The AUTO mode automatically selects the optimum rate.
• Transfer rates may change due to the Network situation.
Mbps : Megabits per second
NETWORK MODE
Select the Network mode.
8VHWKHŸźEXWWRQVWRVHOHFWWKH1HWZRUNPRGH
WIRELESS Ù WIRED
~Note~
• Network mode will be initialized whenever the power is turned on
with Power switch.
• The Wireless will be enabled when Wireless Network card is installed.
• The Wired will be enabled when Wireless Network card is not installed.
MIU Menu (continued)
MIU Menu
'0%4;26+10
92#25-#'5
9'2DKV
92#25-6-+2
92#25-#'5
1((
9'2DKV
/1&'
#&*1%
+0(4#5647%674'
%*
0'6914-/1&'
9+4'.'55
9+4'&