Hitachi CP-X268AWF - Manual (Page 33)

24
Freezing the screen
1. Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen, and the
projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal,
press the FREEZE button again.
Ɣ7KHSURMHFWRUDXWRPDWLFDOO\H[LWVWKH)5((=(PRGHZKHQWKHLQSXWVLJQDO
changes, or when one of the projector’s buttons or the remote control buttons
of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME,
MUTE, KEYSTONE, POSITION, MENU, MAGNIFY and MY BUTTON is
pressed.
Ɣ,IWKHSURMHFWRUFRQWLQXHVSURMHFWLQJDVWLOOLPDJHIRUDORQJWLPHWKH/&'SDQHO
might possibly be printed. Do not leave the projector in the FREEZE mode for
too long.
Temporarily blanking the screen
1. Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN
menu
( 39).
To exit the blank screen and return to the input signal screen, press the
BLANK button again.
Ɣ7KHSURMHFWRUDXWRPDWLFDOO\UHWXUQVWRWKHLQSXWVLJQDOVFUHHQZKHQRQHRI
the projector’s buttons or the remote control buttons is pressed or one of the
commands (except get commands) is transmitted to the control port.
Operating
HOME PAGE UP
PAGE DOWN END
FREEZE
OFF
ON
MAGNIFY
MUTE
VOLUME
KEYSTONE MY BUTTON
1 2
HOME PAGE UP
VIDEO RGB SEARCH
ON
MAGNIFY
ASPECT AUTO BLANK
VOLUME