Hitachi CP-X268AWF User Manual

Page 152

Schedule Settings

6FKHGXOHVHWWLQJVFDQEHFRQ¿JXUHGIURPDZHEEURZVHU
Example: If the IP address of the projector is set to 192.168.1.10:

(

32)

There are three types of scheduling.
'DLO\3HUIRUPWKHVSHFL¿HGRSHUDWLRQDWDVSHFL¿HGWLPHHYHU\GD\
6XQGD\a6DWXUGD\3HUIRUPWKHVSHFL¿HGRSHUDWLRQDWWKHVSHFL¿HGWLPHRQD

VSHFL¿HGGD\RIWKHZHHN

6SHFL¿F'DWH3HUIRUPWKHVSHFL¿HGRSHUDWLRQRQWKHVSHFL¿HGGDWHDQGWLPH

,Q6WDQGE\PRGHWKHSRZHULQGLFDWRUZLOOÀDVKJUHHQIRUDSSUR[

seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to
WKHSURMHFWRUDQGWKHRXWOHWDQGWKHSRZHUVZLWFKPXVWEHWXUQHGRQ>_@7KH
schedule function does not work when the power switch is turned off, [

{] or

the breaker in a room is tripped. The power indicator will lights orange or green
when the projector gets is receiving the power.

NOTE

1) Enter [http://192.168.1.10] into the address bar of the web browser.
2) Enter the Administrator ID and Password and click [Logon].
3) Click [Schedule Settings] on the main menu and select the required schedule

item.

4) Click the [Enable] check box to enable scheduling.
(QWHUWKH'DWH0RQWK'D\IRUVSHFL¿FGDWHVFKHGXOLQJ
6) Click [Add] and set the hour, command and parameters and click [Add This

Schedule] when you want to add a command.

7) Click the [Delete] button when you want to delete a schedule.

8) Click the [Apply] button to save the settings.

4. Utilize projector – Advanced -