Hitachi CP-X268AWF - Manual (Page 61)

52
Item Description
LIVE MODE
Display the screen appearing on the PC via Network.
Press the
Ź button or ENTER button to display the LIVE MODE
Menu.
See [LIVE MODE] in [User’s Manual – Network Functions] for
more information.
PC-LESS
PRESENTATION
Make a presentation without a PC.
The data in the memory card are displayed.
Press the
Ź button or ENTER button to display
the PC-LESS PRESENTATION Menu.
See [PC-LESS PRESENTATION] in [User’s
Manual - Network Functions] for more information.
MIU Menu
/'07=4)$?
2+%674'
5'.'%6
+/#)'
5'672
+0276
126+10
/+7
'#5;/'07
5%4''0
.+8'/1&'
2%.'5524'5'06#6+10
5'672
G5*16
+0(14/#6+10
5'48+%'
MIU Menu
Select [MIU] from the main menu to access the following
functions.
NOTE • The factory default setting for DHCP is “TURN OFF”. If your network
has DHCP enabled , and need to set [IP ADDRESS], [SUBNET MASK] and
[DEFAULT GATEWAY] automatically, please set [DHCP] to “TURN ON”.
(
User’s Manual - Network Functions)
• If you are not utilizing SNTP ( User’s Manual - Network Functions), then
you must set the DATE AND TIME during the initial installation. Please refer to
the item DATE AND TIME on the following list.
NOTE Consult with your network administrator before connecting to an
existing access point on your network. Incorrect network settings on this
projector may cause unnecessary troubles on the network.
2%.'5524'5'06#6+10
6*7/$0#+.
5.+&'5*19
&+4'%64;
&+52.#;5+<'
-';%10(+)