Hitachi CP-X268AWF - Manual (Page 39)

30
Item Description
COLOR TEMP
8VLQJWKHEXWWRQVŸźVZLWFKHVWKHPRGHRIFRORUWHPSHUDWXUH
To adjust CUSTOM
Selecting the CUSTOM and then pressing the
EXWWRQŹRUWKH(17(5EXWWRQdisplays a dialog
to aid you in adjusting the OFFSET and/or GAIN
of the CUSTOM mode.
OFFSET adjustments change the color intensity
on the whole tones of the test pattern.
GAIN adjustments mainly affect color intensity
on the brighter tones of the test pattern.
&KRRVHDQLWHPXVLQJWKHEXWWRQVŻŹDQGDGMXVWWKHOHYHOXVLQJ
WKHEXWWRQVŸź
You can display a test pattern for checking the effect of your
adjustment by pressing the ENTER button.
Each time you press the ENTER button, the pattern changes as
below.
No pattern Ö Gray scale of 9 steps
Ramp Õ Gray scale of 15 steps
• When this function is performed, a certain extra such as a line
may appear.
COLOR
8VLQJWKHEXWWRQVŸźDGMXVWVWKHVWUHQJWKRIZKROHFRORU
Strong Ù Weak
• This item can be selected only for a video signal, s-video or
component video signal.
TINT
8VLQJWKHEXWWRQVŸźDGMXVWVWKHWLQW
Greenish Ù Reddish
• This item can be selected only for a video signal, s-video or
component video signal.
SHARPNESS
8VLQJWKHEXWWRQVŸźDGMXVWVWKHVKDUSQHVV
Strong Ù Weak
• 7KHUHPD\EHVRPHQRLVHDQGRUWKHVFUHHQPD\ÀLFNHUIRUD
moment when an adjustment is made. This is not a malfunction.
PICTURE Menu
PICTURE Menu (continued)
R
+0
G
+0
B
+0
COLOR TEMP [CUSTOM-1]
ENTER :
OFFSET
R
+0
G
+0
B
+0
GAIN
HIGH DEFAULT HIGH CUSTOM MID DEFAULT MID CUSTOM
LOW DEFAULT LOW CUSTOM Hi-BRIGHT-1 DEFAULT Hi-BRIGHT-1 CUSTOM
Hi-BRIGHT-2 DEFAULT Hi-BRIGHT-2 CUSTOM