Hitachi CP-X268AWF - Manual (Page 52)

43
Item Description
AUTO OFF
8VLQJWKHEXWWRQVŸźDGMXVWVWKHWLPHWRFRXQWGRZQWR
automatically turn the projector off.
Long (max. 99 minutes) Ù Short (min. 0 minute = DISABLE)
AUTO OFF
ENABLE
1
AUTO OFF
DISABLE
0
When the time is set to 0, the projector is not turned off automatically.
When the time is set to 1 to 99, and when the passed time with no-
signal or an unsuitable signal reaches at the set time, the projector
lamp will be turned off.
If one of the projector's buttons or the remote control buttons is pressed
or one of the commands (except get commands) is transmitted to the
control port during the corresponding time, projector will not be turned off.
Please refer to the section “Turning off the power” (
19).
LAMP TIME
The lamp time is the time counted after the last resetting. It is
shown in the OPTION menu as the usage time of the lamp.
3UHVVLQJWKH5(6(7EXWWRQRQWKHUHPRWHFRQWURORUWKHEXWWRQŹ
of the projector displays a dialog. To reset the lamp time, select the
5(6(7XVLQJWKHEXWWRQŸ
RESET Õ CANCEL
• Please reset the lamp time only when you have replaced the lamp,
for a suitable indication about the lamp.
• For the lamp replacement, see the section "Lamp" (
57, 58).
FILTER TIME
7KH¿OWHUWLPHLVWKHWLPHFRXQWHGDIWHUWKHODVWUHVHWWLQJ,WLVVKRZQ
LQWKH237,21PHQXDVWKHXVDJHWLPHRIWKHDLU¿OWHU
3UHVVLQJWKH5(6(7EXWWRQRQWKHUHPRWHFRQWURORUWKHEXWWRQŹRIWKH
SURMHFWRUGLVSOD\VDGLDORJ7RUHVHWWKH¿OWHUWLPHVHOHFWWKH5(6(7XVLQJ
WKHEXWWRQŸ
RESET Õ CANCEL
• 3OHDVHUHVHWWKH¿OWHUWLPHRQO\ZKHQ\RXKDYHFOHDQHGRUUHSODFHG
WKHDLU¿OWHUIRUDVXLWDEOHLQGLFDWLRQDERXWWKHDLU¿OWHU
•
)RUWKHDLU¿OWHUFOHDQLQJVHHWKHVHFWLRQ$LU¿OWHU( 59, 60).
MY BUTTON
Sets the assigned function for the MY BUTTON1 and 2 buttons on
the included remote control.
• RGB1: Sets port to RGB1.
• RGB2: Sets port to RGB2.
• MIU: Sets port to MIU.
• COMPONENT: Sets port to COMPONENT.
• S-VIDEO: Sets port to S-VIDEO.
• VIDEO: Sets port to VIDEO.
• e-SHOT: Displays the e-SHOT menu (
53).
• INFORMATION: Displays INPUT INFORMATION ( 45).
• AUTO KEYSTONE EXECUTE: Performs automatic KEYSTONE
correction (
37).
• MY MEMORY: Loads MY MEMORY settings ( 31).
• PICTURE MODE: Changes the PICTURE mode ( 27).
• ),/7(55(6(7'LVSOD\VWKH¿OWHUWLPHUHVHWFRQ¿UPDWLRQGLDORJXH ( 43).
• VOLUME+: Sets the volume up.
• VOLUME-: Sets the volume down.
OPTION Menu
OPTION Menu (continued)