Hitachi CP-X268AWF - Manual (Page 46)

37
SETUP Menu
SETUP Menu
Item Description
AUTO
KEYSTONE
EXECUTE
Selecting this item performs the Automatic keystone distortion
correction. Projector automatically corrects vertical keystone
distortion due to the (forward/backward) setup angle by itself.
• This function will be executed only once when selected in the
Menu. When the slant of the projector is changed, executes this
function again.
• :KHQ9,19(57RU+ 9,19(57LVVHOHFWHGWRWKH0,5525LWHP
in the SETUP menu, if the projector screen is inclined or angled
downward, this function may not work correctly.
• When the zoom adjustment is set to the TELE (telephoto focus),
this correction may be excessive. This function should be used
when the zoom adjustment is set to the WIDE (wide-angle focus)
whenever possible.
• When vertical degree is almost 0 degree, the automatic keystone
distortion correction may not work.
• When vertical degree is over ±30 degree, the automatic keystone
distortion correction may not work well.
• This function will be unavailable when Transition Detector is on (
50).
KEYSTONE
8VLQJWKHEXWWRQVŸźFRUUHFWVWKHNH\VWRQHGLVWRUWLRQ
Upper in the data Ù Lower in the data
• The adjustable range of this function will vary with the type of input
signal. At some signals, this function may not work well.
• This function will be unavailable when Transition Detector is on ( 50).
WHISPER
8VLQJWKHEXWWRQVŸźWXUQVRIIRQWKHZKLVSHUPRGH
NORMAL Ù WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
With the SETUP menu, the items shown in the table below
can be performed.
6HOHFWDQLWHPXVLQJWKHFXUVRUEXWWRQVŸźRQWKH
SURMHFWRURUUHPRWHFRQWURODQGSUHVVWKHFXUVRUEXWWRQŹ
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table. /'07=4)$?
+/#)'
5'672
2+%674'
+0276
126+10
/+7
'#5;/'07
5%4''0
5'.'%6
9*+52'4014/#.
/+4414014/#.
-';5610'
#761-';5610'':'%76'
#7&+1
81.7/'