HP 3100C User Manual
Page 20
The configuration process
19
To configure parameters
1
If you have not already done so, turn the digital sender on.
2
Press
S
ETUP
(
A
LT
+
F4
)
from the main menu to go to the setup
menu.
3
Press
S
ETTINGS
(
F2
) and use the arrow keys to highlight the
General configuration menu from the list which appears. Press
O
K
(
F1
).
4
In the configuration menu, use the arrow keys to scroll to a
parameter you want to modify and then press
C
HANGE
(
F3
).
5
Configure the parameters by selecting a value from a list using
the arrow keys or by typing in a value.
6
When finished, press
O
K
(
F1
). Choose another parameter from
the menu.
7
When finished with the General configuration menu, press
S
AVE
(
F1
).
8
Repeat steps 3 through 7 for the Network, E-Mail, I-Fax, and
Advanced configuration menus.