HP STORAGEWORKS XP24000 - Manual (Page 7)

1 Overview of Volume Security
Unless otherwise specified, the term storage system in this guide refers to the following disk arrays:
• HP StorageWorks XP24000 Disk Array
• HP StorageWorks XP20000 Disk Array
• HP StorageWorks XP12000 Disk Array
• HP StorageWorks XP10000 Disk Array
The GUI illustrations in this guide were created using a Windows computer with the Internet Explorer
browser. Actual windows may differ depending on the operating system and browser used. GUI
contents also vary with licensed program products, storage system models, and firmware versions.
Overview
Volume Security protects data in your HP storage system from I/O operations performed at mainframe
hosts. Security can be applied to logical volumes so that specified mainframe hosts are unable to
read from and write to the specified logical volumes. Volume Security also enables you to prevent
data on logical volumes from being accidentally overwritten by erroneous local or remote copy
operations.
Volume Security can be used in conjunction with the Volume Security Port Option. This optional
program is used to specify storage system ports through which hosts can access logical volumes.
Using Volume Security you can manipulate up to 64 hosts and 65,280 logical volumes for one storage
system. Volume Security also enables you to create up to 64 security groups, 64 host groups, and
64 Volume Groups for one storage system.
Volume Security operations are performed using the licensed HP StorageWorks XP Remote Web
Console software. The Remote Web Console software communicates directly with the storage system
via a local-area network (LAN). Remote Web Console displays detailed Volume Security information
and allows you to configure and perform Volume Security operations for the mainframe systems data
stored on the storage system. For further details, see the HP StorageWorks XP24000/XP20000 Remote
Web Console User’s Guide.
To apply port-level security, you must install the Volume Security Port Option. Before installing this
program, ensure that Volume Security is already installed. For details on the installation procedure,
see the HP StorageWorks XP24000/XP20000 Remote Web Console User’s Guide.
Terminology
There are a few notes regarding terminology that users should be aware of when using this manual:
• In the storage system documentation, logical volumes are sometimes referred to as logical devices
(or LDEVs). Also, the storage system documentation sometimes uses the term, LDEV security to refer
to security policy that volume security enables you to apply to logical volumes.
• In the Hitachi TrueCopy™ for Mainframe User's Guide, primary volumes are often referred to as
M-VOLs, or main volumes. Also, secondary volumes are often referred to as R-VOLs or remote
volumes. In the Hitachi ShadowImage™ for Mainframe User's Guide, primary volumes are often
XP24000/XP20000 Volume Security User's Guide 7