HP STORAGEWORKS XP24000 - Manual (Page 18)

Description Icon
Indicates that the security settings in this security group are currently disabled. If you enable
the security settings, this security group is classified as an access group. Also, volumes in
this security group can be used as secondary volumes (i.e., copy destination volumes) for
copy operations.
Indicates that the security settings in this security group are currently disabled. If you enable
the security settings, this security group will be classified as an access group. Also, volumes
in this security group are unavailable for use as secondary volumes (i.e., copy destination
volumes) for copy operations.
Indicates that the security settings in this security group are currently disabled. If you enable
the security settings, this security group will be classified as a pool group. Also, volumes in
this security group will be available for use as secondary volumes (i.e., copy destination
volumes) for copy operations.
Indicates that the security settings in this security group are currently disabled. If you enable
the security settings, this security group will be classified as a pool group. Also, volumes in
this security group will be unavailable for use as secondary volumes (i.e., copy destination
volumes) for copy operations.
To make changes to a group, right-click a group or the group entry in the tree, then select Add/Change
from the pop-up menu. Changes you make in the resulting dialog box appear in blue italics until you
click Apply or Cancel.
NOTE:
If you make Volume Security settings on one LDKC and then move on to another LDKC, click Apply
or Cancel before moving on to the LDKC.
Hosts Table
This table provides information about hosts. The table contents depend on the selection in the Security
Group tree, as explained below:
• If you select Subsystem, LDKC:00, LDKC:01, Security Group, Host Group, or LDEV Group, the table
shows information about all the hosts.
• If you select a security group, the table shows information about all the hosts that belong to the
selected security group.
• If you select a host group, the table shows information about all the hosts that belong to the selected
host group.
• If you select an LDEV group, the table displays nothing.
Using the Volume Security GUI 18