The host group to port dialog box, The host group to security group dialog box, Figure 17 – HP STORAGEWORKS XP24000 User Manual
Page 36
![background image](/manuals/93445/36/background.png)
Figure 17 The Host Group to Security Group Dialog Box
Description
Item
Indicates the number of the selected LDKC
LDKC
Specifies a host group.
Host Group
Lists information about the security groups in which the specified host group is registered.
•
Security Group indicates the name of a security group.
•
Security indicates whether the security settings in the security group are enabled or
disabled.
•
Group Status indicates whether the security group is an access group or a pool
group.
•
T-VOL/R-VOL indicates whether volumes in the security group can be used as sec-
ondary volumes (i.e., copy destination volume). Enable indicates the volumes can
be used as secondary volumes. Disable indicates the volumes cannot be used as
secondary volumes.
Security Group table
Closes the dialog box.
OK
The Host Group to Port Dialog Box
To use the Host Group to Port dialog box, you must ensure that Volume Security Port Option is already
installed.
The Host Group to Port dialog box (
) appears when you right-click an item in the tree view
of the Volume Security window (
) and then select List -> Host Group to Port from the pop-up
menu. The Host Group to Port dialog box enables you to find ports via which hosts can access volumes
(see “
Locating Ports through Which Hosts Can Access Volumes
Using the Volume Security GUI
36