HP 210/210LX - Manual (Page 35)

3-4 3-4 3-4 3-4 3-4 Copying
Reduce or Enlarge Copies Reduce or Enlarge Copies Reduce or Enlarge Copies Reduce or Enlarge Copies Reduce or Enlarge Copies
The HP Color Copier 210 contains predefined settings for reducing and
enlarging copies. Using these settings, you can enlarge standard photograph
sizes to letter/A4, or take advantage of a special feature called Auto Fit.
Auto Fit does a pre-scan of the item on the glass and automatically sizes it to
fit the current copy paper size. The pre-scan makes Auto Fit a bit slower than
the standard copy procedure, but it ensures that the edges of your original
always appear on the copy.
NOTE NOTE NOTE NOTE NOTE To copy successfully using Auto Fit, you must place all originals, including small
photographs, in the corner along the two green borders.
When enlarging, Auto Fit enlarges the item to the largest size that can fit on
the page without distorting the image.
NOTE NOTE NOTE NOTE NOTE If the list of photograph sizes (e.g., 4x6 → Ltr or 13x20cm → A4) doesn’t look
familiar, verify that the correct copy paper size has been set for your copier. Refer to
“Change Copy Paper Size” later in this chapter.
1 11 11 Press the Reduce/Enlarge button.
2 22 22 To scroll through the list of settings, press the Plus (+) or Minus (–) buttons.
Refer to the Help Card for the list of options.