HP 210/210LX - Manual (Page 24)

HP Color Copier 210/210LX User’s Guide 1-17 1-17 1-17 1-17 1-17
10 T 10 T 10 T 10 T 10 Test the Copier est the Copier est the Copier est the Copier est the Copier
Use the copier’s built-in self test to verify that the copier is operating
properly. A sample of the self test is shown below.
Model: C5302A
Serial: xxxxxxxxxxx
Control: 4.1
Auto Doc Feed: YES
Copy Controller: NO
HP Color Copier 210 Self Test page
1 11 11 Make sure that the Best, Normal, or Fast light is on and not blinking.
2 22 22 Press the Menu button until Self Test Page appears in the panel display.
3 33 33 Press the Select/Resume button.
The test-page printout has a set of four colored bars and lines, which should
appear solid, as shown in the sample. The intensity of the colors will vary
depending on the type of paper used (plain paper, HP Premium Inkjet paper,
HP Premium Glossy Paper, or HP Premium Transparency Film).
If thin, random streaks appear in the color bars when the test page is printed,
they indicate a copy-quality problem. For help solving copy-quality problems,
see the section titled “Print-Cartridge Problems” in Chapter 6, “Troubleshoot-
ing and Maintenance.”
4 44 44 If you installed an automatic document feeder, Auto Doc Feed: Yes should be
printed on the self-test page. (If you installed a feeder, but the self-test page
reads Auto Doc Feed: No, return to Step 8 of the Ten Easy Steps to Set Up
Your Copier, and verify that you plugged in the automatic document feeder
properly.)
5 55 55 To verify proper functioning of your HP Color Copier 210, make a copy of
the self-test page.