HP 24SII - Manual (Page 99)

& !
OPTION ACCESSIBILITY: Through any serial computer port.
By responding to the Enter Request: message at the end of the main
configuration menu (
see Section 8.1 ) with capital "A" for any serial
module or "9" for the M24SII-V02 high speed parallel module
(Enable/Disable I.D. Page Message), you may enable or disable the
I.D. Page Message to print by individual port.
The Model 24SII DES will respond with:
Enter Request :A
-------------------------------------------
| Port | Logical Name | Form feed | I.D.|
| | (Computer) |Begin| End | Page|
-------------------------------------------
| 1 |Device A | Off | Off | Off |
| 3 |Device C | Off | Off | Off |
| 4 |Device D | Off | Off | Off |
-------------------------------------------
Enter Port Number (ENTER=Exit) :
Enter the number of the computer port for which you wish to enable or
disable the I.D. Page Message and then strike the Enter key. For
example, if you entered "3" and Enter for Port 3, the Model 24SII DES
will respond with:
I.D. Page Message Switch is ( Off )
Enter 1 for ON, 2 for OFF , ENTER for no change :
You should enter "1" to enable the I.D. Page Message to print, "2" to
disable the I.D. Page Message, or strike the Enter key if no change in
the present condition is required. For example, if you entered "1" to
enable the I.D. Page Message, the Model 24SII DES will respond
with:
I.D. Page Message Switch is ( On )
Enter 1 for ON, 2 for OFF , ENTER for no change :