HP 24SII User Manual

Page 81

Strike any Key to Continue, or X to Exit

---------------------------------------------------
| Port | Baud | Word | Stop |Parity| Xon / Xoff |
| | Rate | Size | Bits | | Xmit | Recv |
---------------------------------------------------
| 1 | 9600| 8 | 1 |None | Off | Off |
| 2 | 9600| 8 | 1 |None | Off | Off |
| 3 | 9600| 8 | 1 |None | Off | Off |
| 4 | 9600| 8 | 1 |None | Off | Off |
--------------------------------------------------

Strike any Key to Continue, or X to Exit

Port Select Code is :$SELECT

I.D. Page Message is :
This Job is from

Strike any Key to Continue, or X to Exit

Copyright (c) Bay Technical Associates, 1992
Model 24SII Data Exchange System Rev. 2.02
Total memory 1M
This Module is 1
Status.......................................1
Program Port Logical Name....................2
Set Port Designation.........................3
Program Port Select Code.....................4
Set Port Select Mode.........................5
Set Serial Port Configuration................6
Set Input Inactivity Timeout.................7
Enable/Disable Form Feed Mode................8
Program I.D. Page Message....................9
Enable/Disable I.D. Page Message.............A
Select Print Schedule for I.D. Page..........B
Program Default Printer Assignment...........C
Exit Configuration...........................X

Enter Request :

You may now make whatever changes are necessary by responding
to the above menu. The Exit function will return you to the Operations
Mode.